PocketPriceFree iPhone app

Get the app
Reseller ToolkitNovember 17, 20269 min read

How to Test Gold at Home: 6 Ways to Tell Real Gold From Fake (2026)

By Cody CockrumFull-time reseller since 2017 and owner of Room Swap Consignments in Holly Hill, SC.

Contains affiliate links. As an Amazon Associate I earn from qualifying purchases. Learn more

Have one? Check what yours is worth, free

I’ve bought gold over the counter at Room Swap Consignments for years, and the question I hear most is “Is this real?” Most of the time you can answer it at the kitchen table in five minutes. Here’s exactly how I do it.

What you need

  • A loupe to read the tiny karat stamps (see how to use a jeweler’s loupe).
  • A strong magnet, the small rare-earth kind, not a fridge magnet.
  • An acid kit with a touchstone: separate bottles for 10k, 14k, 18k and 22k.
  • Nitrile gloves and safety glasses, because the acids are real nitric acid.
  • Paper towels and a little baking soda in water to wipe and neutralize the stone.
  • Optional: a scale that reads to 0.01 g for the density check and for working out melt value.

How to test gold at home, step by step

1. Find and read the stamp

Start with the marks, because they tell you what the piece claims to be. Look inside a ring band, on the clasp or the little tag beside it, on earring posts and on the bail of a pendant. Under a loupe, the common gold marks are:

  • 10K or 417 (41.7% gold)
  • 14K, 585 or 583 (about 58.5% gold)
  • 18K or 750 (75% gold)
  • 22K or 916 (91.6% gold), common on jewelry from India and the Middle East
  • 24K or 999 (pure gold)

Then look for the marks that mean it is not solid gold: GF or “1/20 12K GF” (gold-filled), RGP (rolled gold plate), GP or GEP (gold plate, gold electroplate) and HGE (heavy gold electroplate). “14K HGE” is plated, no matter how big the 14K is. A stamp is where testing starts, not where it ends: fakes get stamped too, and plenty of old or handmade gold has no stamp at all.

2. Do the magnet test

Gold isn’t magnetic. Hold a strong magnet next to the chain links or the ring band. If the piece jumps to it, it’s gold-plated steel or has iron in it, and you can stop there. Test the chain itself, not the clasp: the spring inside a clasp is often steel even on solid 14k. A piece that ignores the magnet hasn’t passed anything yet. Brass, copper, silver and aluminum aren’t magnetic either, so this test only rules things out. I go deeper on it in the magnet test for silver, brass and bronze.

3. Check the wear spots

Plating rubs off where a piece gets the most wear: the edges of chain links, the clasp, the bottom of a ring band and the high points of a charm. Look there with the loupe. A brassy yellow, a pinkish copper or a gray color showing through a gold surface means plating. Solid gold is the same color all the way through. Green or black marks on skin, flaking and bubbling are other giveaways. Weight helps too: real gold feels heavy for its size, though a heavy feel alone proves nothing.

4. Run the acid test on a touchstone

This is the test that gives you an actual karat. Put on gloves and glasses, work near an open window, and keep kids and pets away. The acid goes on the stone, never on the jewelry.

  1. Make a streak. Rub a hidden spot of the piece (the back of a clasp, the inside of a band) firmly across the touchstone. You want a solid line about an inch long. Press hard enough to get through any plating. On a piece you own that you suspect is heavily plated, file a tiny notch in a hidden spot first and rub from there.
  2. Make three or four streaks side by side, so you can try more than one acid.
  3. Start with the acid for the karat you think it is. If it’s stamped 14k, put a drop of 14k acid across one streak. This is the acid kit I keep at the counter (opens in a new tab)the acid kit I keep at the counter: one bottle per karat, plus the stone.
  4. Watch for 20 to 30 seconds. If the streak stays bright and sharp, the piece is at least that karat. If it fades, turns brown or disappears, it’s lower.
  5. Step up or down. Held at 14k? Try 18k on the next streak; if 18k eats it, you have 14k. Faded at 14k? Try 10k; if it holds there, it’s 10k. If the streak vanishes almost the moment 10k acid touches it, it isn’t gold, or it’s plated and the plating was all you tested.
  6. Clean up. Blot the acid with a paper towel, wipe the stone with a little baking soda in water, and dry it. Old streaks come off with very fine sandpaper.

White gold tests the same way. Most white gold is plated with rhodium for its bright finish, so rub hard enough to get through it to the gold underneath. Keep a scrap of known 14k in the kit and streak it next to anything you’re unsure of. If the known piece starts failing, your acid has gone weak.

5. Check density on chunky pieces

For heavy pieces like class rings, nuggets and bars, a density check backs up the acid. Weigh the piece dry, then weigh it hanging by a thread in a cup of water on the scale. Divide the dry weight by the difference between the two. Pure gold comes out around 19.3, 18k around 15 to 16, 14k around 13 to 14.5, and 10k around 11 to 12. Brass and most plated base metals land near 8 or 9. You need a scale that reads to 0.01 g; I cover the ones worth having in the best digital scale for resellers. One warning: tungsten is almost exactly as dense as gold, which is why fake gold bars are made with it. A bar that matters goes to a pro.

6. Know when to hand it to a pro

An electronic tester gives a fast reading without fumes, and a gold buyer with an XRF machine can read the exact mix of metals in a few seconds. Most coin shops and gold buyers will test a piece for free. For anything that could be worth real money, like a heavy chain, a signed designer piece or a bar, their reading is worth the drive.

What tested gold is worth

Scrap value is simple math: weight in grams × purity × today’s gold price per gram. Use 0.417 for 10k, 0.585 for 14k, 0.75 for 18k and 0.916 for 22k. The jewelry and watches price guide has a melt calculator with today’s spot price, so you don’t have to look it up. Melt is the floor, not the ceiling. A signed designer piece, an antique locket or a nice cameo in a gold frame often sells for well over its weight, which is why I never scrap anything until I know what it would bring as jewelry. Our vintage jewelry price guide covers the pieces that are worth more whole.

Gold-filled, plated and vermeil: what each one means

These three get mixed up all the time, and the difference is most of the money. Gold-filled (GF, 1/20 12K GF, 1/10 10K GF) is a layer of real gold bonded to brass by heat and pressure. It is far thicker than plating and wears for decades, which is why old gold-filled watch cases and lockets still look good. The fraction tells you how much of the weight is gold: 1/20 means one-twentieth. Gold plate (GP, GEP, HGE, RGP) is a much thinner layer, and its scrap value is close to nothing. Vermeil is gold over sterling silver, so its value is mostly the silver underneath. It’s often marked 925 with no karat mark at all, and the acid test on a deep streak reads silver, not gold.

On the stone, gold-filled and plated pieces behave the same way: the first light streak holds under 10k acid, then a deeper streak dissolves. That’s why I always make one deep streak from a hidden spot before I believe a result.

Gold testers: budget, what I use, and pro picks
BudgetStrong neodymium magnetBest for: Screening chains and rings at a yard saleWhy: Catches plated steel in two seconds. It can’t tell gold from brass, so it’s a first pass, not a verdict.See it on Amazon → (opens in a new tab)
What I useCody’s pickAcid test kit with touchstone (10k to 22k)Best for: Anyone who buys gold more than once in a whileWhy: Gives you a real karat answer, works on yellow and white gold, and refills are easy to find.See it on Amazon → (opens in a new tab)
ProElectronic gold testerBest for: A buying counter, or a lot of jewelry every weekWhy: Faster than acid with no fumes or stone to clean. Check it against known pieces, since thick plating can still fool it.See it on Amazon → (opens in a new tab)

Mistakes to avoid

  • Skip the bargain no-name acid kits. The acids go weak fast, and weak acid makes plated jewelry look real.
  • Testing the clasp. Springs and findings are often steel or a lower karat. Test the chain or the band.
  • Rubbing too lightly on the stone, so all you test is the plating.
  • Trusting the stamp alone. “14K HGE” and “14K GF” are plated and filled, and fakes get stamped 14K too.
  • Paying gold prices for gold-filled. In “1/20 12K GF” only one-twentieth of the weight is gold, and only 12k at that.

Check yours free

Try it right now — free, no account

Take a photo of one item and get a real price in seconds.

One free demo per visitor · Results in under 10 seconds

Quick answers

Can you test gold at home without acid?

Yes, partly. Read the karat stamp with a loupe, try a strong magnet (gold is not magnetic), look for another metal showing through at the wear spots, and check density on heavier pieces. Together they catch most fakes, but only an acid test or a professional tester gives you the actual karat.

Do the vinegar, bite or float tests work?

No. Vinegar does not react with gold, but it does not react with many plated pieces either, so a pass means little. Biting only dents soft metal, and plenty of things sink. Use a magnet, an acid kit or a tester instead.

What does 585 mean on gold jewelry?

585 means 14 karat, or 58.5 percent gold. The other common number marks are 417 for 10k, 750 for 18k, 916 for 22k and 999 for 24k.

Is gold-filled jewelry worth anything?

A little as scrap, more as jewelry. A piece marked 1/20 12K GF is one-twentieth 12 karat gold by weight, so its melt value is small. Signed vintage gold-filled pieces and lockets often sell well as jewelry, though.

Does an acid test damage the jewelry?

Hardly. You rub a hidden spot on the touchstone, which takes off a tiny amount of metal, and the acid goes on the stone, not on the piece. Never drip acid straight onto jewelry.

How do you test white gold?

With the same karat acids. Most white gold is plated with rhodium, so rub hard enough on the stone to get through the plating to the gold underneath before you add the acid.