Best Label Printer for Booth Tags: What I Tag My Booth With (2026)
By Cody CockrumFull-time reseller since 2017 and owner of Room Swap Consignments in Holly Hill, SC.
Contains affiliate links. As an Amazon Associate I earn from qualifying purchases. Learn more
Have one? Check what yours is worth, freeHand-writing price tags used to be the most boring hour of my week. Now a tag with the price, the item name, my booth number and a barcode prints in about two seconds. Here’s the printer I use and how to set it up.
What a booth tag needs
- The price, big enough to read from a step back.
- A short item name, like “Brass candlestick.” If a shopper moves the tag to a better piece, the cashier sees the mismatch.
- Your booth or vendor number, so the mall credits the sale to you.
- A barcode the mall can scan, if your mall scans. Many use your vendor number plus an item number. Ask the front desk what they want before you print a single tag.
- A QR code (optional), which a shopper’s phone can open to see the item online.
Thermal printer or printable sheets?
Thermal printers use heat-sensitive labels, so there’s no ink or toner to buy. You print one tag at a time from your phone as you price, which is how I work: price an item, print its tag, stick it on, next. Direct thermal labels can darken in heat or strong sun over time, so keep the roll out of a hot car. In a normal booth they hold up for the life of the tag.
Printable sheets (like 30-to-a-page address labels) run through the printer you already have. They’re great when you sit down to tag a whole box at once at a computer, but you need the computer and printer nearby, and lining up the sheet takes a test print.
How to set up a label printer for booth tags, step by step
- Ask your mall about tags first. Some require their own tag stock, some want a certain barcode format, and some only need your vendor number in a set spot. Five minutes at the desk saves a roll of wrong tags.
- Pick a label size. For most smalls I use 50 × 30 mm labels (about 2 × 1.2 inches): room for a price you can read, a name, a booth number and a barcode. Use 40 × 30 mm for small boxes and jewelry cards. Furniture and anything with a finish you can’t stick to gets a string tag.
- Use genuine rolls. The B1 reads a small chip in NIIMBOT’s own label rolls to know what’s loaded, and off-brand rolls often won’t print. I keep 50 × 30 mm NIIMBOT rolls (opens in a new tab)50 × 30 mm NIIMBOT rolls in my booth bag.
- Charge it and pair it. Charge it fully, then connect over Bluetooth from the app you print with.
- Set the darkness. A middle setting is a good start. If barcodes come out gray or won’t scan, go a step darker.
- Print one test tag and scan it. Try it at the mall’s register, or at least with a phone camera, before you print fifty.
- Tag in batches. Price a box, print the batch, tag the batch. Switching back and forth between pricing and tagging is where the time goes.
- Stick it where it won’t do damage. Use the bottom or back. Never stick a label on a paper label, a book jacket, the face of a print or an old finish.
Printing tags from PocketPrice
PocketPrice makes the tag from the price it gives you, so pricing and tagging are one job. In the iPhone app, the Picker plan and up print to a NIIMBOT over Bluetooth in one tap, right from the item. Every plan, including the free one, prints PDF tag sheets: Avery 5160 address labels, standard 2 × 3 tags, table cards, and single-label PDFs sized for Dymo and Zebra labels. You can set your own tag numbers (vendor number plus item number, or whatever your mall uses), so the barcode is one the register already knows. More on that on the inventory and tags page, and for big sales, see price tags, barcodes and label printers for estate sales.
When each kind of printer makes sense
If you add a few dozen items a week, a pocket thermal printer is hard to beat. If you tag hundreds a week at a desk, a 2-inch desktop thermal printer is built for all-day runs. If you’re just starting out or only restock once a month, use the printer you already have and a box of address labels until you know you’ll stick with it. For setting up the booth itself, see how to start an antique booth and booth inventory management.
What to put on a tag, by size
- 40 × 20 mm (small): price, booth number and a barcode. No room for a name, so save it for small items that are obvious at a glance.
- 40 × 30 mm (standard): price, a two- or three-word name, booth number and a barcode or QR code.
- 50 × 30 mm (wide): everything above with room to read it: a big price, a short name on one or two lines, your booth number large in the corner, and a barcode. This is the size I reach for most.
- String tags and table cards: furniture, lamps, framed art, and groups of like items (“All glassware on this shelf $4”).
Tagging different kinds of items
- Glass and china: on the bottom, away from any paper label or mark a buyer will want to read.
- Linens and clothing: a string tag through a seam or a safety pin, never a sticker on fabric.
- Books: on a clear bag or a bookmark-style tag, never on the jacket or the cover.
- Jewelry: on the card or bag it hangs in, or a small string tag through the clasp.
- Toys and boxed items: on the plastic wrap, not the box itself; collectors pay for clean boxes.
- Tools and metal: almost anywhere, but wipe off oil first so the label holds.
Barcodes your mall can read
Most mall registers read a Code 128 barcode, which is the common kind on booth tags and the kind label printers make by default. What matters more is what the barcode says. Many malls want your vendor number followed by your item number, like 71-0045, so the register knows whose sale it is. Others only need the price and vendor number typed in. Ask, then set your tag numbers to match before your first big print run.
Printing a batch of tags from PocketPrice, step by step
- Price the items. Snap a photo of each one, or use Batch Mode for a box at a time.
- Add them to inventory. Each item gets its price, name and your next tag number.
- Open Print labels. Tap “Select all not printed” to pick up everything you haven’t tagged yet.
- Pick a size. A NIIMBOT size for a Bluetooth printer, or a sheet size like Avery 5160 for a home printer.
- Print. In the iPhone app on Picker and up, it prints straight to the NIIMBOT. Otherwise download the PDF and print it.
- Tag and stock. Printed items are marked, so next time you only print the new ones.
On the item page, the app’s Print tag button prints a single tag in one tap, which is handy when you add one piece to the booth on a Tuesday.
Keeping a booth tagged
Tags wear out, fall off and get moved. Walk the booth once a week with a few blank labels and the printer charged. Re-tag anything with a curled or faded label, and when you mark a piece down, print a fresh tag rather than writing over the old one. A clean tag tells shoppers the booth is looked after, and it keeps the register from ringing up an old price.
| Pick | Best for | Why |
|---|---|---|
| BudgetAvery 5160 address labels for your home printer | Best for: Printing 30 tags at a time from a computer | Why: No new printer to buy. PocketPrice prints its small tags lined up for this exact sheet.See it on Amazon → (opens in a new tab) |
| What I useCody’s pickNIIMBOT B1 Bluetooth label printer | Best for: Booth vendors who tag a box at a time | Why: No ink, fits in a pocket, and prints 2-inch tags with a barcode right from your phone.See it on Amazon → (opens in a new tab) |
| Pro2-inch desktop thermal label printer (Zebra class) | Best for: Big booths printing hundreds of tags a week | Why: Built for all-day printing at a desk. PocketPrice makes PDFs sized for 2 × 1 and 3 × 2 inch Zebra labels.See it on Amazon → (opens in a new tab) |
Mistakes to avoid
- Buying off-brand rolls for a B1. It reads a chip in the genuine roll, and other rolls often won’t print.
- Printing barcodes too light. Turn the darkness up a step and test-scan before a big run.
- Making up your own barcode format without asking the mall what its register reads.
- Sticking labels on paper labels, book jackets, art or old finishes. Use a string tag.
- Leaving thermal labels in a hot car or a sunny window. Heat darkens them.
Check yours free
Try it right now — free, no account
Take a photo of one item and get a real price in seconds.
One free demo per visitor · Results in under 10 seconds
Quick answers
What size labels are best for booth price tags?
50 by 30 mm labels (about 2 by 1.2 inches) fit a readable price, a short name, a booth number and a barcode on most small items. Use 40 by 30 mm for small boxes and jewelry cards, and string tags for furniture.
Do thermal price tags fade?
Direct thermal labels can darken in heat or strong sunlight over time, so keep rolls out of hot cars and sunny windows. In a normal indoor booth they last for the life of the tag.
Do I need a barcode on my booth tags?
Only if your mall scans tags at the register. Many malls key in or scan a vendor number plus an item number. Ask the front desk what format they use before you print.
Can I print price tags from my phone?
Yes, with a Bluetooth label printer. PocketPrice prints tags to a NIIMBOT printer from the iPhone app on the Picker plan and up, and every plan prints PDF tag sheets you can print on any printer.
Does the NIIMBOT B1 work with other label rolls?
Usually not. The B1 reads a chip in genuine NIIMBOT label rolls to know what is loaded, and off-brand rolls often will not print.